IP Cameras

ACTI:                  admin/123456 or Admin/123456
Amcrest:               admin/admin
American Dynamics:     admin/admin or admin/9999
Arecont Vision:        none
AvertX:                admin/1234
Avigilon:              Previously admin/admin, changed to Administrator/<blank> in later firmware version
Axis:                  Traditionally root/pass, new Axis cameras require password creation during first login
Basler:                admin/admin
Bosch:                 None required, but new firmwares (6.0+) prompt users to create passwords on first login
Brickcom:              admin/admin
Canon:                 root/camera
Cisco:                 No default password, requires creation during first login
Dahua:                 Requires password creation on first login. Previously this process was recommended
Digital Watchdog:      admin/admin
DRS:                   admin/1234
DVTel:                 Admin/1234
DynaColor:             Admin/1234
FLIR:                  admin/fliradmin
FLIR (Dahua OEM):      admin/admin
FLIR (Quasar/Ariel):   admin/admin
Foscam:                admin/<blank>
GeoVision:             admin/admin
Grandstream:           admin/admin
Hanwha:                admin/no default password, must be created during initial setup
Hikvision:             Firmware 5.3.0 and up requires unique password creation; previously admin/1234
Honeywell:             admin/1234
IndigoVision (Ultra):  none
IndigoVision (BX/GX):  Admin/1234
Intellio:              admin/admin
Interlogix:            admin/1234
IQinVision:            root/system
IPX-DDK:               root/admin or root/Admin
JVC:                   admin/jvc
Longse:                admin/12345
Lorex:                 admin/admin
LTS:                   Requires unique password creation; previously admin/12345
March Networks:        admin/<blank>
Mobotix:               admin/meinsm
Northern:              Firmware 5.3.0 and up requires unique password creation; previously admin/1234
Oncam:                 admin/admin
Panasonic:             Firmware 2.40 and up requires username/password creation; previously admin/1.
Pelco:                 New firmwares require unique password creation; previously admin/admin
Pixord:                admin/admin
Q-See:                 admin/admin or admin/123456
Reolink:               admin/<blank>
Samsung Electronics:   root/root or admin/4321
Samsung Techwin (old): admin/1111111
Samsung (new):         Previously admin/4321, but new firmwares require unique password creatic
Sanyo:                 admin/admin
Scallop:               admin/password
Sentry360 (mini):      admin/1234
Sentry360 (pro):       none
Sony:                  admin/admin
Speco:                 admin/1234
Stardot:               admin/admin
Starvedia:             admin/<blank>
Sunell:                admin/admin
SV3C:                  admin/123456
Swann:                 admin/12345
Trendnet:              admin/admin
Toshiba:               root/ikwd
VideoIQ:               supervisor/supervisor
Vivotek:               root/<blank>
Ubiquiti:              ubnt/ubnt
Uniview:               admin/123456
W-Box HikvisionOEM,old:admin/wbox123
W-Box(Sunell OEM,new): admin/admin
Wodsee:                admin/<blank>